|
|
Post by PipeSmith on Apr 24, 2017 9:09:05 GMT -7
I'm working on some additional stem options for the Taper Bore Stem Kits, specifically for use when running an exposed atomizer. These are round tapered stems, with a pocket base that houses the adapter (similar to how we used to build the wooden stems a couple of years back). This allows use of the stem across the Kayfun-style spectrum, or with any other atty that has a similar raised nipple with standard drip tip port. Fitted on Kayfun V3  Fitted on Kayfun V5  If there's sufficient interest in stems like/ similar to these, I'll get the blanks in and set up for the kits. PS |
|
|
|
Post by gwbruce on Apr 24, 2017 9:15:35 GMT -7
Yes, yes , yes and yes. These really look nice.
|
|
|
|
Post by Peter on Apr 24, 2017 17:31:33 GMT -7
Am I correct in thinking that this has an insert but also sleeves over the the top of the tank?
|
|
|
|
Post by PipeSmith on Apr 24, 2017 18:11:20 GMT -7
Am I correct in thinking that this has an insert but also sleeves over the the top of the tank? That is correct - the skirt shrouds the top nipple, with the insert inside to junction the drip tip port. Kayfun 3.1, Lite +, V4, V3 Mini, V5 - all use their standard lid/ stem is interchangeable across the line. ETA - the photos above are of the same stem shown seated on the V3 and V5, each using their standard lid PS |
|
raywyn
Junior Member
Paddle faster.....i can hear banjos....
Posts: 56
|
Post by raywyn on Apr 27, 2017 13:33:56 GMT -7
 im really liking this PS stem. Fits flush to the KFM v2.1 (and was designed for the PS atty cover). |
|
raywyn
Junior Member
Paddle faster.....i can hear banjos....
Posts: 56
|
Post by raywyn on Apr 27, 2017 13:35:50 GMT -7
|
|
|
|
Post by gwbruce on Apr 27, 2017 13:44:09 GMT -7
That is one sweet stem. I really like it.
|
|
|
|
Post by Peter on May 21, 2017 5:08:21 GMT -7
Yup....yup....yup.....Me likey.
|
|
|
|
Post by fredkite on May 22, 2017 5:09:00 GMT -7
Yes from me!
|
|
|
|
Post by bookbear on Jun 17, 2017 12:09:50 GMT -7
Me, also!
|
|
|
|
Post by PipeSmith on Jul 31, 2017 9:19:40 GMT -7
The New 2 5/8" Taper Bore Stem Kits Round Taper, bored specifically for the tanks with ~14mm nipple top (Kayfun/ Kayfun-styled tanks) Example sized & fitted for 22mm tank  Example sized & fitted for 18mm/ 19mm tank  Now live on the PipeSmith website - PipeSmith Taper Bore Stems
**There may also be different options for all Taper Bore Stems (TBS) available soon, primarily depending on interest; Taper Bore Stem/ Kits - the way the stem kits are currently offered Taper Bore Stem/ Built - Built stem kit, user still does the sanding, finish, etc. Taper Bore Stem/ Finished - Built and finished stem (user may still wish to do additional fit/ finish/ bend to suit) As always, your opinions are important and help drive PipeSmith innovations for the e-pipe community - let us know your thoughts! PS |
|
