|
Post by gwbruce on Dec 6, 2017 13:08:30 GMT -7
I'm with Ryan. That rustification is cool.
|
|
|
Post by gwbruce on Dec 6, 2017 6:16:19 GMT -7
I agree with Ken. Kayfun is a good way to go.
|
|
|
Post by gwbruce on Dec 4, 2017 6:46:24 GMT -7
That looks like it might be a good one to get. Thanks.
|
|
|
Post by gwbruce on Dec 4, 2017 6:42:51 GMT -7
That is one sexy looking pipe right there. Yep it sure it
|
|
|
Post by gwbruce on Nov 30, 2017 6:35:07 GMT -7
I agree with Peter. Great pipe and awesome stem.
|
|
|
Post by gwbruce on Nov 27, 2017 7:08:28 GMT -7
I build my coils for my pipes at 1 to 1.2 ohms. It will run just fine.
|
|
|
Post by gwbruce on Nov 22, 2017 15:24:26 GMT -7
I am thankful that I have a great family. My beautiful wife and kids are one of the reasons that I get up each day. I am also thankful for this forum and the epipe community. It has helped me stay calm during many trying times and taught me a lot about epipes and the world. I am thankful that I have some very close friends both here on the forum and where I live. I am thankful that my father has good health and that we are able to take care of him. I am thanful that I have a good job. I am thankful that there are many men and women who sacrifice so much that I have freedom to live the life I enjoy.
|
|
|
Post by gwbruce on Nov 22, 2017 6:48:52 GMT -7
No problem. Get it right then you can tell the rest of us how to do it so we can enjoy it too.
|
|
|
Post by gwbruce on Nov 20, 2017 7:29:32 GMT -7
How did you do the verticle coil? Got any pics
|
|
|
Post by gwbruce on Nov 17, 2017 6:53:38 GMT -7
Those are some darn fine looking pipes. You are really doing some great work Ken.
|
|
|
Post by gwbruce on Nov 15, 2017 16:25:19 GMT -7
Welcome aboard. It's great to have you.
|
|
|
Post by gwbruce on Nov 15, 2017 6:36:00 GMT -7
Let me say first off congrats on quiting smoking. Welcome to our little corner of heaven. You have picked some great gear to get your epipe experience started off with. Yep, Ken is a great guy to work with and makes some damn good pipes. You will not be disappointed with your new pipe and for one I can't wait to see pic's of it when you get it up and going. Again welcome to the forum and I hope you find your PipeSmith pipe everything you dreamed it would be.
|
|
|
Post by gwbruce on Nov 13, 2017 6:41:42 GMT -7
Welcome to our little corner of the world. Glad you found us.
|
|
|
Post by gwbruce on Nov 9, 2017 6:38:42 GMT -7
Great looking pipe stand Peter. I need to make me one of those.
|
|
|
Post by gwbruce on Nov 9, 2017 6:37:48 GMT -7
|
|